Home About Us Brands Stocked Search Model Railway Slot Cars Model Kits Servicing Location How To Order Testimonials FAQ Contact Us
Home

This is an easy to use range of electronic products for both Conventional DC and Digital DCC, OO gauge model railways. Whether you are new to model trains or an experienced user, we hope you will find something of interest. There are simple low cost items or Digital colour light signals with DCC decoder built in which just clip into the track with NO wires! All have one thing in common, they are easy to use and designed by model railway enthusiasts for enthusiasts - everything is made in the UK too.

SFX Series Sound Effects Modules

Easy low cost sound which works on any railway - £40.00 each.

At the heart of each SFX is a microchip containing real recorded train sounds and a small motion sensor which detects what the train is doing and replays the most appropriate sounds through its tiny loudspeaker. The motion sensor also turns the power on and off so that there is no need for any switch and battery life is preserved.

• Easy to fit in seconds - no wiring or switches!

• No pickups or wires - works on regular DC & DCC

• Self contained capsule - built-in speaker & battery

• Tiny - smaller than a 50p: 25mm x 20mm x 12mm

• Fit capsule into a loco, tender, wagon, coach....

• Real recorded sounds from Steam, Diesel, Electric, etc


SFX Sound capsules are supplied with battery and fitting guide


SFX10 Steam locomotive - including fireman coaling, gear & whistle. - Available Now

SFX20 Diesel locomotive - including turbo whine, air, horn etc. - Available Now


The following modules will be available soon.

SFX30 Electric power locomotive - including motor whine, horn, etc.

SFX50 Diesel Multiple unit - including changes, door slams, horn.

SFX60 Electric Multiple unit - including motor whine, door slams, horn.

SFX70 Shunting (to fit in goods) - including couplings, squeels, buffers.

SFX80 Coaches - including couplings, doors, wheel squeal.


BAT1 Pack of 3 spare batteries for SFX sound, Coach lighting & AL units £3.00 for a pack of 3.

 LFX Series Light Effects Controllers

These Lighting effects modules offer easy ways to add interesting lighting effects to your layouts and can all controlled by a standard 12V DC supply or DCC controller - bring your layout alive!

Very easy to connect using the screw terminals fitted - you wire the LEDS direct with no need for any extra resistors etc and with One-Touch DCC it sets up in seconds!

Note all of these modules only work with LED’s, not filament bulbs.

Adds interesting Lighting effects to your layout - brings it alive!

Uses standard LEDs directly connected to the screw terminals - no extra resistors etc

Simple 2 wire connection to DCC or a standard 12V DC accessory output.

LFX1 Level Crossing LED Controller --------- £15.00

LFX2 Home/Shop lights LED Controller ----- £15.00

LFX3 Traffic Lights LED Controller ----------- £15.00

LFX4 Log / Campfire LED Controller ---------- £15.00

LFX5 Welding Effects LED Controller --------- £15.00

 AL Series Automatic Tail Light Kits

3 types of easy fit tail light modules which do not require pick-ups from the track or an on-off switch as they run for ages on a small battery and automatically switch on when the wagon or coach moves and switch off 4 minutes after it stops!

Fit to brake vans, coaches, wagons etc in a few minutes by just drilling 2 small holes for the Lantern style LED which then just plugs into the module. Just clip in the regular button battery and replace the roof! - NO SOLDERING!

Runs for ages on standard button battery.

Each unit includes the control module, 2 lantern style LEDs and 1 Battery. (Coach/Wagon not included)

AL1 Flashing lamp for current modern image tail lights on brake van, wagon or coach. ---- £15.00

AL2 Flickering effect - for paraffin lamps or firebox - flickers more when train goes over bumpy rails! --- £15.00

AL3 Constant light - for easily lighting Coach, Buffet or WC! ---- £15.00


Dual function units have an effect & separate output for cab, coach, headlight or headcode lights in four versions:

AL21 Flashing tail + constant light outputs - Modern image. ---- £20.00

AL22 Flickering tail + constant light outputs - Vintage flame lantern effect (which flickers more when the train is going over bumpy track!). ---- £20.00

AL23 Spark-arc electric effect + constant light outputs - Can be used under the car to produce simulated arc sparks as seen on electrics. ---- £20.00

AL24 Dual amber door effect + constant light outputs - When train stops, amber door lights come on. Will go out after a time and not whilst train is moving. ---- £20.00


BAT1 Pack of 3 spare batteries for SFX sound, Coach lighting & AL units £3.00 for a pack of 3 which will last most people years!

 CL Series Coach Lighting Units

Easy to fit - No wiring!

No switch - turns on automatically as the train moves, turns off 4 minutes after last movement so lights stay on in stations.

No pickups so works on both regular DC or DCC.

Traditional warm white or modern cool white lighting.

Also with tail light, sparks or door lights effects!

Lights stay bright and constant with no flickering.

Fits most OO/HO coaches; lighting strip is 8mm wide x 220mm long (but may be cut down).

Included battery is the popular 20mm diameter 2032 coin cell - lasts months in normal use, years in standby.

CL1 Cool white for modern coaches with fluorescent or LED lighting. ---- £20.00

CL2 Warm white for traditional coaches simulating oil lamps or bulbs. ---- £20.00


Coach Lighting plus extra effect, each with plug-in LEDs for effect - no soldering!

CL21 Cool white lighting plus modern flashing Lantern LED tail light. ---- £25.00

CL22 Warm white lighting plus flickering flame Lantern LED tail light. ---- £25.00

CL23 Cool white lighting plus bright Electric Spark-arc effect LEDs. ------ £25.00

CL24 Cool lighting plus amber door lights which light after train stops. --- £25.00


BAT1 Pack of 3 spare batteries for SFX sound, Coach lighting & AL units £3.00 for a pack of 3 which will last most people years!

BL-1 OO/HO Buffer Light

OO/HO Buffer light ready to fit

•Simply clips onto the track - no wires!

•Fits next to most buffer stops and kits

•Free standing or at platform end

•Low cost, easy to fit and use

•When used on DCC, both LED lights are on constantly, on DC, 1 light will come on varying with speed

•Paint or add weathering

•Helps bring your layout to life


£5.00 each (buffer/track not included)

BL-2 N Buffer Light

N Gauge Buffer light ready to fit

•Simply clips onto the track - no wires!

•Fits next to most buffer stops and kits

•Free standing or at platform end

•Low cost, easy to fit and use

•When used on DCC, both LED lights are on constantly, on DC, 1 light will come on varying with speed

•Paint or add weathering

•Helps bring your layout to life

£5.00 each (buffer/track not included)

TT-1 Track Tester

With instructions and ready to use.

•Quickly tests track for power faults

•Low cost and easy to use

•Works on N or OO/HO track

•Indicates DCC, DC polarity or fault

•Small enough to check point frogs.

£5.00 each

 PC-1 Point Control Module

This DCC module enables you to quickly and easily control most popular 2-position 12-16V point motors, eg Peco, Hornby etc.

This DCC module takes all of its power from the standard 2 wire DCC track or controller output and it has a built in CDU which helps give the point motor a good boost of power without draining too much from the DCC supply all at once.

The point motor is simply connected to the control module.

One-Touch DCC™ is a brand new way of instantly controlling your new signals or accessories - NO programming CV codes etc.

£17.00 each (Motor, housing & track not included)

PC200 Quad One-Touch DCC Point controller

With multiple Route Store & Switch control £40

SIGNALS

All the signals below come as an assembled signal with head, aluminium mast and electronics fitted inside the base unit.

• Included is a detailing pack to customise the signal adding hand rails, phone, post symbol etc.

• Unique One-Touch DCC™ setting up - NO programming of CV codes etc!

• Wire-Free - can clip straight into standard Hornby or Bachmann fixed track or simple 2 wire connection by removing clip and just connect 2 wires to the track

• Works with most controllers with accessory control including Dynamis, Select, Elite etc

• Each can work independently or mirror another - ideal for home & distant signals!

• Realistic transparent lens style lamps with small decay - just like the real thing!

Train-Tech DS-1. Home 2 Aspect Signal

DCC Home Signal,

Red & Green.

£24.00 each


 DS-2. Distant 2 Aspect Signal

DCC Distant Signal,

Yellow & Green.

£24.00 each

DS-3. 3 Aspect Signal


DCC Home Distant Signal,


Red, Yellow & Green.


£27.00 each


DS-5. 4 Aspect Signal


DCC Outer Distant Signal,


Red, Yellow, Green & Yellow.


£30.00 each


DS-6. Dual Head Home 2 Aspect


DCC Dual Head Home,


Red, Green, & Red, Green


£35.00 each


DS-8. Stop-Caution 2 Aspect Signal


DCC Stop Caution Signal,


Red & Yellow.


£24.00 each


SIGNAL CONTROLLERS

These Colour Light Signal decoder modules enable almost any Colour Light LED Signal (any gauge) to connect to your DCC controlled layout - very easy to set up and use.

All modules include One-Touch DCC™ setting up - NO programming of CV codes etc!

Simple 2 wire connection to either track or controller - no separate power needed

LED’s connect direct to the module with fitted screw terminals - no resistors etc required

Works with many makes of signals which use LEDs, Train-Tech kits or make your own

Signals can work independently or mirror another - ideal for home & distant signals!

Works with most DCC controllers with accessory control including Dynamis, Select, Elite etc

SC1 Dual Aspect Signal Controller

SC1 - Two 2 aspect signals

Controls one or two 2 aspect signals.

Compatible with Train-Tech SK2,SK3,SK7,SK8 and other manufacturer's LED signals.

£17.00 each (Signal shown not included)

SC2 3/4 Aspect Signal Controller

SC2 - Controls One 3/4 aspect or a 2 aspect and route signal

Compatible with Train-Tech SK4,SK5,SK6 and other manufacturer's LED signals.

£17.00 each (Signal shown not supplied)

SC3 Dapol Semaphore Signal Controller

This Signal controller is designed specifically to control one or two Dapol Semaphore signals and contains two DCC decoders and internal power regulator to directly connect to one or two standard unmodified Dapol OO or N gauge motorised Semaphore signals.

Just connect the 4 wires from the Dapol signal directly to the screw terminals of the controller and then 2 wires from the controller to the nearest piece of DCC powered track or the controller - thats it! No separate power supply or wiring required.

£30.00 each (signals shown not included)

Level Crossing

These are N and OO scale models of UK style level crossings which are preassembled with lights and sound and come complete with Peco™ static level crossing barriers and fence as shown in the photo. They are easy to fit needing  just a 10mm diameter hole drilled in your baseboard and the model is held in place by a special flush Mounting Cap (included). Electrically these are very easy to wire up as all connections are by push fit single core wires. They can be powered by any 9-18V DC supply, DCC or a 9 volt battery.

Manual or Automatic control

The level crossing lights and sounds can be controlled in a number of ways:

1) A switch connected between the power supply and the level crossing.

2) Controlled completely automatically by a Track Sensor via Layout Link

3) Switched by a Mimic Switch connected via Layout Link

4) If layout is DCC via your controller which is easily set up using One Touch DCC

LC10 Level Crossing barrier set with lights and sound for OO/HO - Single £25

LC10P Level Crossing barrier set with lights and sound for OO/HO - Pair £45