Digital Accessories


ScalextricDigitalLogo.JPG

DIGITAL is the newest form of slot racing; Up to 6 cars can race at the same time, and can change lanes to overtake and block other cars.

Classic or Sport Track can be used, and cars carry a digital 'chip' that is controlled by a new type power base and controllers. Conversion Microprocessors are available for all ANALOGUE cars, which require a solder installation. This enables all older slot cars to become DIGITAL cars. Most newer Scalextric cars are 'DPR ready', and a DPR Digital Microprocessor can simply be plugged in to enable it to become DIGITAL. We stock the conversion Microprocessors and also offer an installation service.


ScalexC8516.jpg

Scalextric C8516 Easy-Fit Digital Chip

Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout.
C8516 EasyFit Digital Plug is suitable for fitting to convert open-wheeled single-seat F1 style Digital Plug Ready (DPR) Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to perform.
£14.99

ScalexC8515.jpg

Scalextric C8515 Easy-Fit Digital Chip

Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout.
C8515 EasyFit Digital Plug is suitable for fitting to standard Digital Plug Ready (DPR) Scalextric cars.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform.
£14.99

ScalexC7005.jpg

Scalextric C7005 Retro-Fit Digital Chip

Retro-Fit Conversion Microprocessor Type A.
Now the only Scalextric retro-fit module available.
This in-car microprocessor module allows the conversion of a standard Scalextric car to work on Scalextric Digital layouts.
Most Scalextric cars, from 1957 to current date, can be converted to digital operation.
The conversion requires hobbyist skills and some tools including a soldering iron.
Supplied with illustrated step-by-step instructions.
S.R.P. £14.99. Our Price £13.49


ScalexC7014.jpg

Scalextric C7014 Pit Lane Track L/H

Includes Sensor.
Contents:
Left-hand Pit In and Pit Out track sections each 525mm long, with borders.
£49.99

ScalexC7015.jpg

Scalextric C7015 Pit Lane Track R/H

Includes Sensor.
Contents:
Right-hand Pit In and Pit Out track sections each 525mm long, with borders.
£49.99

ScalexC7017.jpg

Scalextric C7017 Pit Lane Curve Track

Pack of 4.
Single Lane Radius 3, 22.5 degree Curves.
£8.99

ScalexC7019.jpg

Scalextric C7019 Pit Lane Curve Outer Borders

Pack of 4.
Single Lane Radius 3, 22.5 degree Curve Outer Border
£8.99

ScalexC7016.jpg

Scalextric C7016 Pit Lane Straight Track

Pack of 4.
Single Lane Straight Track 175mm long.
£8.99

ScalexC7036.jpg

Scalextric C7036 Straight Lane Change Track

Includes Sensors.
525mm long.
£43.99

ScalexC7002.jpg

Scalextric C7002 Digital Hand Controller

This hand controller is suitable for use with Scalextric Digital Powerbases.
Not suitable for use with standard Scalextric or older analogue power bases.
Supplied with 8 x Alternate Coloured Tops
(Blue, Purple, Red, Orange, Yellow, Green, Black and White).
£15.99

ScalexC7039.jpg

Scalextric C7039 Digital Lap Counter

The Digital Lap Counter makes Scalextric Digital racing even more exciting. The unit counts down the number of laps remaining in your race, from sprint challenges to endurance racing (up to a maximum 999 laps). With a built in start sequence racing is more realistic than ever before.
The Digital Lap Counter displays the laps remaining along with the number of the race leader. At the end of the race, the unit displays the finishing order.
Powered by the track so no batteries are required.
Suitable for use with 4-car Digital Powerbase and C7041 Digital Pit Lane Game.
£54.99

ScalexC7042.JPG

Scalextric C7042 Advanced 6 Car Power Base

The Advanced 6 car Digital Powerbase can be used to race up to 6 cars on a Scalextric Digital layout at the same time or be used on a standard Scalextric two-lane layout.
The unit has a clear user interface with two levels of features to suit both the novice and experienced user.
The Skill Level option allows you to adjust the maximum power levels to individual cars so that 'novice versus expert' races can be run more fairly.
Hand throttles can be calibrated to equalise controller performance.
Multiple gaming modes, timed endurance and total lap format racing.
Ghost cars (PACER) function for setting 1 to 6 cars to run automatically, with switchable lane changing and lap counting on individual cars.
Setting the car ID is easy via a simple, one-button action.
This Powerbase can be used in Analogue or Digital power modes. This great feature allows the Powerbase to be used with standard 2-lane Scalextric circuits, using two cars only, or with Scalextric Digital layouts for 1-to-6 car action. All features are available in either mode.
Now the best of both worlds is offered - an all-in-one race control system for Analogue and Digital racing.
(requires the P9300 15V 4Amp Transformer - sold separately)
£164.99.

Hornby-ScalexP9300.jpg

Scalextric P9300 4Amp Digital Power Supply

15V 4 Amp Transformer. UK only.
Replacement transformer suitable for:
Hornby R8213: Select controller
Hornby R8214: Elite controller
Hornby R8312: eLink controller
Scalextric C7042: Advanced 6 Car Powerbase
Scalextric C7056: 4 Car Powerbase or Digital Conversion Kit
£41.99

Home
About Us
Brands Stocked
New In Stock
Model Railway
Slot Cars
Plastic Kits
Special Offers
Servicing/Repair
Internet Links
Where We Are
How To Order
Testimonials
Contact Us
FAQ
Survey
e-mail me