Page Under Construction.


DC (Analogue) Controllers
We stock a range of DC Controllers from 'train set' replacements to Cased and Panel Mount units.


GM-W.jpg

Gaugemaster Model W

Single Track Walkabout Controller for 'N', 'OO' and most small Gauges.
Input: 1 x 16v A.C. at 1.25 amps (Gaugemaster T1, M1 or 100M recommended, requires a GM75 6 Pin DIN Plug to connect to 100M, sold seperately).
Output: 1 x 12v D.C. at 1 amp controlled.
Fitted with 1.5 metres of 4 core cable
Measurements: 90mm x 59mm x 35mm deep
£39.95

GM-Combi.jpg

Gaugemaster Combi

Single Track Transformer and Controller for ‘N’, ‘OO’ and most small Gauges. An uncomplicated controller which comes complete with a separate, dedicated transformer plugging directly into a wall socket with a 1.8m lead to plug into the controller.
Transformer:
Input: Mains (240v A.C.)
Output: 1 x 18v A.C. at 1.1 amp
Measurements: 65mm x 80mm x 83mm
Controller:
Input: 1 x 18v A.C. at 1.1 amp
Output: 1 x 12v D.C. at 1 amp controlled
Accessories: 1 x 18v A.C. at 1 amp uncontrolled
Measurements: 64mm x 46mm x 84mm
£39.95

GM-100M.jpg

Gaugemaster 100M

Single Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges, with two accessory outputs.
Input: Mains (240 volts A.C. 3 amp fused)
Output: 1 x 12v D.C. controlled at 1 amp
Accessories: 1 x 12v D.C. at 1 amp uncontrolled
1 x 16v A.C. at 1 amp
1 x 16v A.C. DIN Socket for Gaugemaster handheld units (HH, W and WS)
Measurements: 148mm x 90mm x 125mm deep
£84.95

GM-D.jpg

Gaugemaster Model D

Twin Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges, with two accessory outputs, this is the most popular unit in the Gaugemaster range.
Input: Mains (240 volts A.C. 3 amp fused)
Output: 2 x 12v D.C. at 1 amp each controlled
Accessories: 1 x 16v A.C. at 1 amp uncontrolled
1 x 12v D.C. at 1 amp uncontrolled
Measurements: 148mm x 90mm x 125mm deep
£94.95

HornbyR8012.jpg

Hornby R8012 HM2000 Double Controller

A complete transformer and speed control unit with control for two separate trains.
Total power output is 2 amps with compensation to regularise speed under varying conditions of load.
Positive off rotary speed control cuts all power when the knob is turned to zero.
Features include forward and reverse switch, plus LED indicators for mains supply and output power.
Outputs include non-variable AC and DC power for point motors and other powered accessories.
Please Call

250 Train Tech Logo.JPG

This is an easy to use range of electronic products for both Conventional DC and Digital DCC, OO gauge model railways. Whether you are new to model trains or an experienced user, we hope you will find something of interest. There are simple low cost items or Digital colour light signals with DCC decoder built in which just clip into the track with NO wires! All have one thing in common, they are easy to use and designed by model railway enthusiasts for enthusiasts - everything is made in the UK too.


TT-SFX.jpg

SFX Series Sound Effects Modules

Easy low cost sound which works on any railway - £40.00 each.
At the heart of each SFX is a microchip containing real recorded train sounds and a small motion sensor which detects what the train is doing and replays the most appropriate sounds through its tiny loudspeaker. The motion sensor also turns the power on and off so that there is no need for any switch and battery life is preserved.

• Easy to fit in seconds - no wiring or switches!
• No pickups or wires - works on regular DC & DCC
• Self contained capsule - built-in speaker & battery
• Tiny - smaller than a 50p: 25mm x 20mm x 12mm
• Fit capsule into a loco, tender, wagon, coach....
• Real recorded sounds from Steam, Diesel, Electric, etc

SFX Sound capsules are supplied with battery and fitting guide

SFX10 Steam locomotive - including fireman coaling, gear & whistle. - Available Now
SFX20 Diesel locomotive - including turbo whine, air, horn etc. - Available Now

The following modules will be available soon.

SFX30 Electric power locomotive - including motor whine, horn, etc.
SFX50 Diesel Multiple unit - including changes, door slams, horn.
SFX60 Electric Multiple unit - including motor whine, door slams, horn.
SFX70 Shunting (to fit in goods) - including couplings, squeels, buffers.
SFX80 Coaches - including couplings, doors, wheel squeal.

BAT1 Pack of 3 spare batteries for SFX sound, Coach lighting & AL units £3.00 for a pack of 3.


TT SCx.JPG

LFX Series Light Effects Controllers

These Lighting effects modules offer easy ways to add interesting lighting effects to your layouts and can all controlled by a standard 12V DC supply or DCC controller - bring your layout alive!
Very easy to connect using the screw terminals fitted - you wire the LEDS direct with no need for any extra resistors etc and with One-Touch DCC it sets up in seconds!
Note all of these modules only work with LED’s, not filament bulbs.
Adds interesting Lighting effects to your layout - brings it alive!
Uses standard LEDs directly connected to the screw terminals - no extra resistors etc
Simple 2 wire connection to DCC or a standard 12V DC accessory output.
LFX1 Level Crossing LED Controller --------- £15.00
LFX2 Home/Shop lights LED Controller ----- £15.00
LFX3 Traffic Lights LED Controller ----------- £15.00
LFX4 Log / Campfire LED Controller ---------- £15.00
LFX5 Welding Effects LED Controller --------- £15.00

TT ALx.jpg

AL Series Automatic Tail Light Kits

3 types of easy fit tail light modules which do not require pick-ups from the track or an on-off switch as they run for ages on a small battery and automatically switch on when the wagon or coach moves and switch off 4 minutes after it stops!
Fit to brake vans, coaches, wagons etc in a few minutes by just drilling 2 small holes for the Lantern style LED which then just plugs into the module. Just clip in the regular button battery and replace the roof! - NO SOLDERING!
Runs for ages on standard button battery.
Each unit includes the control module, 2 lantern style LEDs and 1 Battery. (Coach/Wagon not included)

AL1 Flashing lamp for current modern image tail lights on brake van, wagon or coach. ---- £15.00
AL2 Flickering effect - for paraffin lamps or firebox - flickers more when train goes over bumpy rails! --- £15.00
AL3 Constant light - for easily lighting Coach, Buffet or WC! ---- £15.00

Dual function units have an effect & separate output for cab, coach, headlight or headcode lights in four versions:
AL21 Flashing tail + constant light outputs - Modern image. ---- £20.00
AL22 Flickering tail + constant light outputs - Vintage flame lantern effect (which flickers more when the train is going over bumpy track!). ---- £20.00
AL23 Spark-arc electric effect + constant light outputs - Can be used under the car to produce simulated arc sparks as seen on electrics. ---- £20.00
AL24 Dual amber door effect + constant light outputs - When train stops, amber door lights come on. Will go out after a time and not whilst train is moving. ---- £20.00

BAT1 Pack of 3 spare batteries for SFX sound, Coach lighting & AL units £3.00 for a pack of 3 which will last most people years!


TT-CLx.jpg

CL Series Coach Lighting Units

Easy to fit - No wiring!
No switch - turns on automatically as the train moves, turns off 4 minutes after last movement so lights stay on in stations.
No pickups so works on both regular DC or DCC.
Traditional warm white or modern cool white lighting.
Also with tail light, sparks or door lights effects!
Lights stay bright and constant with no flickering.
Fits most OO/HO coaches; lighting strip is 8mm wide x 220mm long (but may be cut down).
Included battery is the popular 20mm diameter 2032 coin cell - lasts months in normal use, years in standby.
CL1 Cool white for modern coaches with fluorescent or LED lighting. ---- £20.00
CL2 Warm white for traditional coaches simulating oil lamps or bulbs. ---- £20.00

Coach Lighting plus extra effect, each with plug-in LEDs for effect - no soldering!
CL21 Cool white lighting plus modern flashing Lantern LED tail light. ---- £25.00
CL22 Warm white lighting plus flickering flame Lantern LED tail light. ---- £25.00
CL23 Cool white lighting plus bright Electric Spark-arc effect LEDs. ------ £25.00
CL24 Cool lighting plus amber door lights which light after train stops. --- £25.00

BAT1 Pack of 3 spare batteries for SFX sound, Coach lighting & AL units £3.00 for a pack of 3 which will last most people years!


TT BL1 Buffer stop.JPG

BL-1 OO/HO Buffer Light

OO/HO Buffer light ready to fit
•Simply clips onto the track - no wires!
•Fits next to most buffer stops and kits
•Free standing or at platform end
•Low cost, easy to fit and use
•When used on DCC, both LED lights are on constantly, on DC, 1 light will come on varying with speed
•Paint or add weathering
•Helps bring your layout to life

£5.00 each (buffer/track not included)


TT BL-2 N Buffer Light.JPG

BL-2 N Buffer Light

N Gauge Buffer light ready to fit
•Simply clips onto the track - no wires!
•Fits next to most buffer stops and kits
•Free standing or at platform end
•Low cost, easy to fit and use
•When used on DCC, both LED lights are on constantly, on DC, 1 light will come on varying with speed
•Paint or add weathering
•Helps bring your layout to life

£5.00 each (buffer/track not included)


TT TT1 Track tester.JPG

TT-1 Track Tester

With instructions and ready to use.
•Quickly tests track for power faults
•Low cost and easy to use
•Works on N or OO/HO track
•Indicates DCC, DC polarity or fault
•Small enough to check point frogs.

£5.00 each


TT dcc_point_controller_motor.jpg

PC-1 Point Control Module

This DCC module enables you to quickly and easily control most popular 2-position 12-16V point motors, eg Peco, Hornby etc.
This DCC module takes all of its power from the standard 2 wire DCC track or controller output and it has a built in CDU which helps give the point motor a good boost of power without draining too much from the DCC supply all at once.
The point motor is simply connected to the control module.
One-Touch DCC™ is a brand new way of instantly controlling your new signals or accessories - NO programming CV codes etc.
£17.00 each (Motor, housing & track not included)


SIGNALS

All the signals below come as an assembled signal with head, aluminium mast and electronics fitted inside the base unit.
• Included is a detailing pack to customise the signal adding hand rails, phone, post symbol etc.
• Unique One-Touch DCC™ setting up - NO programming of CV codes etc!
• Wire-Free - can clip straight into standard Hornby or Bachmann fixed track or simple 2 wire connection by removing clip and just connect 2 wires to the track
• Works with most controllers with accessory control including Dynamis, Select, Elite etc
• Each can work independently or mirror another - ideal for home & distant signals!
• Realistic transparent lens style lamps with small decay - just like the real thing!


TT RG Signal.JPG

DS-1. Home 2 Aspect Signal

DCC Home Signal,

Red & Green.

£24.00 each


TT RG Signal.JPG

DS-2. Distant 2 Aspect Signal

DCC Distant Signal,

Yellow & Green.

£24.00 each


TT RYB Signal.jpg

DS-3. 3 Aspect Signal

DCC Home Distant Signal,

Red, Yellow & Green.

£27.00 each


TT RYGY Signal.jpg

DS-5. 4 Aspect Signal

DCC Outer Distant Signal,

Red, Yellow, Green & Yellow.

£30.00 each


TT-dcc_double_signal.jpg

DS-6. Dual Head Home 2 Aspect

DCC Dual Head Home,

Red, Green, & Red, Green

£35.00 each


AwaitingImageWeb.JPG

DS-8. Stop-Caution 2 Aspect Signal

DCC Stop Caution Signal,

Red & Yellow.

£24.00 each


SIGNAL CONTROLLERS

These Colour Light Signal decoder modules enable almost any Colour Light LED Signal (any gauge) to connect to your DCC controlled layout - very easy to set up and use.
All modules include One-Touch DCC™ setting up - NO programming of CV codes etc!
Simple 2 wire connection to either track or controller - no separate power needed
LED’s connect direct to the module with fitted screw terminals - no resistors etc required
Works with many makes of signals which use LEDs, Train-Tech kits or make your own
Signals can work independently or mirror another - ideal for home & distant signals!
Works with most DCC controllers with accessory control including Dynamis, Select, Elite etc


TT SCx.JPG

SC1 Dual Aspect Signal Controller

SC1 - Two 2 aspect signals
Controls one or two 2 aspect signals.
Compatible with Train-Tech SK2,SK3,SK7,SK8 and other manufacturer's LED signals.
£17.00 each (Signal shown not included)

TT SCx.JPG

SC2 3/4 Aspect Signal Controller

SC2 - Controls One 3/4 aspect or a 2 aspect and route signal
Compatible with Train-Tech SK4,SK5,SK6 and other manufacturer's LED signals.
£17.00 each (Signal shown not supplied)

TT SC3.jpg

SC3 Dapol Semaphore Signal Controller

This Signal controller is designed specifically to control one or two Dapol Semaphore signals and contains two DCC decoders and internal power regulator to directly connect to one or two standard unmodified Dapol OO or N gauge motorised Semaphore signals.
Just connect the 4 wires from the Dapol signal directly to the screw terminals of the controller and then 2 wires from the controller to the nearest piece of DCC powered track or the controller - thats it! No separate power supply or wiring required.
£30.00 each (signals shown not included)

DCC-Logo-500.jpg

DCC Concepts of Australia produce a wide range of electronic items to enhance the running of your layout, for both Analogue and Digital setups.
From loco and accessory decoders, to the cobalt range of point motors, switches and electrical accessories.
As well as the huge range of electrical and wiring accessories that DCC Concepts produce they also make a huge variety of other products for the model railway enthusiast from wheelsets to weathering powder, track cutters to platform lighting.


DCC-Zen-Logo.jpg

All our DCC Concepts loco decoders are supplied with stay alive units which are designed to aid your locomotives running characteristics during slow running, these basically keep the decoder "alive" for a few milliseconds if dirt or dead spots are located on the track.


DCC-ZenN6D.jpg

DCC Concepts DCD-ZN6D Loco Decoder

Zen 6 Pin Direct plug-in decoder with stay alive unit
The decoder offers slow running characteristics and as it is the smallest decoder in the range you will always find places to house it.

Decoder Size - •Length: 13.5mm •Width: 8.5mm •Depth: 3mm
Motor drive rating 750mA/1amp, 2 Functions.
Each - £26.95
5 Pack - £119.95 (to order)

DCC-ZenN68.jpg

DCC Concepts DCD-ZN68 Loco Decoder

ZEN 6 PIN VERSATILE 2 Function Decoder with Stay Alive.
Much like its "bigger brothers" the N68 decoders have very smooth motor drive characteristics which allow for slow speed running even inside N scale locomotives.
These decoders are small enough to fit in any N scale locomotive and with the included 6 pin & 8 pin harnesses you can use them on OO/HO scale locos as well.

Decoder Size - •Length: 13.5mm •Width: 8.5mm •Depth: 3mm
Motor drive rating 750mA/1amp, 2 Functions.
Each - £29.95
5 Pack - £134.95 (to order)

DCC-ZenN8D.jpg

DCC Concepts DCD-ZN8D Loco Decoder

ZEN NANO 8 Pin Direct 4 Function Decoder with Stay Alive.
The smallest 8 pin direct plug decoder in the range. This decoder is smaller than most blanking plates so fitting it into a locomotive will be very easy.

Decoder Size - •Length: 15mm •Width: 7mm •Depth: 5mm
Motor drive rating 750mA/1amp, 4 Functions.
Each - £29.95
5 Pack - £134.95 (to order)

DCC-ZenN8H.jpg

DCC Concepts DCD-ZN8H Loco Decoder

ZEN NANO 8 Pin Wired 2 Function Decoder with Stay Alive.
One of the smallest decoders produced by DCC Concepts. This decoder is only 15mm long so it can be hidden inside any locomotive either steam, diesel or electric.

Decoder Size - •Length: 15mm •Width: 7mm •Depth: 5mm
Motor drive rating 750mA/1amp, 2 Functions.
Each - £29.95
5 Pack - £134.95 (to order)

DCC-Zen360.jpg

DCC Concepts DCD-Z360 Loco Decoder

ZEN 360 8 Pin Direct 4 Function Decoder with Stay Alive
The Zen 360 decoder has been developed to fit in almost any OO/HO locomotive irrespective of DCC socket orientation. As long as your locomotive has an 8 pin socket, this decoder will fit. This decoder has been designed with a twin PCB stacked one on top of the other so you only need to plug it in as it will fit in place of the original blanking plate.

Decoder Size - •Length: 14.5mm •Width: 12.5mm •Depth: 3.5mm
Motor drive rating 750mA/1amp, 4 Functions.
Each - £26.95
5 Pack - £119.95 (to order)

DCC-Zen218.jpg

DCC Concepts DCD-Z218 Loco Decoder

ZEN 218 21 & 8 Pin 4 Function Decoder with Stay Alive.
The Zen 218 decoder is a very versatile decoder which takes away the choice of which decoder to buy for your new locomotive as it comes complete with both 21 and 8 pin plugs. Due to its size will fit in most OO/HO scale locomotives.

Decoder Size - •Length: 22mm •Width: 16mm •Depth: 5mm.
Harness length 75mm.
Motor drive rating 750mA/1amp, 4 Functions.
Each - £26.95
5 Pack - £119.95 (to order)

DCC-CB1Omega.jpg

DCC Concepts DCP-CB1 Cobalt Omega

COBALT Omega Slow Action Analogue Point Motor.
Supplied complete including the mounting screws and the very popular double-sided foam mounting pads so there is nothing else needed!
Cobalt Classic Ω has been totally re-engineered on the inside to make it quieter and even more durable with added features too:
Now the throw-bar is pre-centred and ready to install, no soldering thanks to its spring connectors, switchable power supply range 7 to 18v and THREE switches, each switch is directly linked to the movement of the throw-bar for absolute confirmation of point changing.
Typical power requirement 20mA. Can be converted to Digital with the AD series of decoders.
Each - £16.95, - - 6 Pack - £94.95 (to order) - - 12 Pack - £184.95 (to order)

DCC-CB1iP.jpg

DCC Concepts DCP-CB1ip Cobalt ip Analogue

COBALT ip Slow Action Analogue Point Motor.
Supplied complete including the mounting screws and the very popular double-sided foam mounting pads so there is nothing else needed!
While Cobalt-iP may look almost the same on the outside, it has a totally new and even quieter internal gearing structure, re-designed internal electronics to add actively managed drive speed and at the same time, added an all new microprocessor-controlled “intelligent power” system to make Cobalt-iP perform better than any point motor you have ever seen. :
The throw-bar is pre-centred and ready to install, no soldering thanks to its spring connectors, power supply range 7 to 18v and THREE switches only operating if the point has REALLY changed, a direction reverse switch.
Standby power 5mA operating power 50mA (typical). Can be converted to Digital with the AD series of decoders.
Each - £18.95, - - 6 Pack - £109.95 (to order) - - 12 Pack - £199.95 (to order)

DCC-CBDiP.jpg

DCC Concepts DCP-CB1Dip Cobalt ip Digital

COBALT ip Slow Action Digital (DCC on-board) Point Motor.
Supplied complete including the mounting screws and the very popular double-sided foam mounting pads so there is nothing else needed!
Digital fitted version of the Cobalt-iP, with the samegearing structure, microprocessor-controlled “intelligent power” system to make Cobalt-iP perform better than any point motor you have ever seen.
The throw-bar is pre-centred and ready to install, no soldering thanks to its spring connectors, power supply range 7 to 18v and TWO switches only operating if the point has REALLY changed, auto centering and direction reverse software.
Standby power 5mA operating power 50mA (typical). Digital Fitted - decoder not required.
Each - £21.95, - - 6 Pack - £124.95 (to order) - - 12 Pack - £244.95 (to order)

GM-DCC23.jpg

Gaugemaster DCC 23 6 pin Loco decoder

Most suited to N Gauge locomotives. Key features of this standard decoder include smooth operation, plug and play, transponder id-equipped, all mode programming, decoder reset CV, motor isolation protection, advanced consisting, 2 and 4 digit addressing.
Motor rated at 1 amp (2 amp peak) with 2 functions at 0.5 amps and measures 10.6 x 8.7 x 2.86mm.
£24.95

GM-DCC26.jpg

Gaugemaster DCC 26 8 pin Loco Decoder

Compact 4 Function 8 pin Loco Decoder.
•Size: 18.5mm x 10.5mm x 4.8mm (0.73” x 0.42” x 0.18”)
•Power Handling: 1.1A Motor Drive (1.6A peak), 4 functions - each 150mA, 200mA max. •Addressing: 2/4 digit, •Harness, 90mm overall length, removable 9 pin JST.
•DC Enabled •Adjustment free Back EMF that will give perfect low speed control.
4 functions which can be remapped as well as directional or dimmed lighting, there are a dozen different lighting effects available.
£13.95

Bach36-567.jpg

Bachmann 36-567

E-Z Command Next18 Loco Decoder.
One of the smallest decoders on the market.
This decoder is designed to fit the New Bachmann & Graham Farish NEXT18 DCC Ready OO and N gauge locomotives and many Continental Locos
Length: 15mm x Width: 9.5mm x Depth: 2.8mm
£21.95

Bach36-558A.jpg

Bachmann 36-558A

E-Z Command 6 Pin DCC Loco Decoder.
2 Function, Max 0.75A continuous motor load.
£17.95

Home
About Us
Brands Stocked
New In Stock
Model Railway
Slot Cars
Plastic Kits
Special Offers
Servicing/Repair
Internet Links
Where We Are
How To Order
Testimonials
Contact Us
FAQ
Survey
e-mail me